Robot: Yaskawa PL80; YRC1000 controller (Standard Interface); MotoPlus and Ethernet functions are enabled
Software version: 1.7.1
When the program executes
CALL JOB:MM_INIT_SOCKET ARGF"192.168.170.22;50000;1"
the program waits for byte99 to reset to 0 and does not continue.
In Mech-Center the client also does not show that it gets online.
I can ping the robot and the IP address of robot and IPC are in the same subnet and have the same subnet mask.
I tried LAN2 and LAN3 on robot side but both lead to the same error.
How can I resolve this issue?