The result from vision to viz is not the same as reality

Q&A
,
1

Hi everyone. I have calibrated hand-eye in (EIH) mode. I have got the “mech vision” output but in “mech viz” I see the image result is not in the correct position in reality. Looking forward to feedback, Thanks experts

IMG_20250310_210712
IMG_20250310_2107121920×1810 222 KB

IMG_20250310_165626
IMG_20250310_1656261920×2560 308 KB

2

Please check whether the capture flange pose or calibration parameters are correct.