For some Kawasaki robots newly delivered to specific regions, when the robot program is initiated, the teach pendant will automatically navigate to the StartUp Screen, as shown in the figure below. Clicking Set later option still does not proceed with running the robot program.
To skip the startup setting, perform the following steps:
-
Press the R button on the teach pendant. Input the R code 9894 to switch to Lv3 mode.
-
The Aux Function interface opens. Click 20. Model, System Setting.
-
In the Model, System Setting interface, Click 22. StartUp Setting.
-
In the StartUp Setting interface, select Robot Installation Posture, and check all the three Not Required checkboxes, so that the startup setting can be skipped.
