Notes on replacing IPC DIN rail power supply

Knowledge Base
1
  1. The AC power cable is shown in the following figure. Connect the power cable to the power terminal one by one.
  2. The DC power cable is shown in the following figure. The positive and negative terminals of the power seat are connected one-to-one to the positive and negative screen prints on the device；The following DC power cable diagram is for reference.
  3. The power supply voltage input is between 18-36V, and it is recommended to use a 180W power supply.
    image
    image1920×886 89.6 KB

    image
    image1920×1575 92.9 KB