Symptom:
When starting the standard interface service or adapter in Mech-Center, the following error occurs:
[WinError 10038] An operation was attempted on something that is not a socket
Cause:
- Network issues, such as unstable network causing sudden disconnection. This leads to the failure of vision information transmission from Mech-Center. If it happens occasionally, it might be due to this reason.
- Problems in the robot-side program. After sending information using socket send, the socket is closed directly without waiting for socket receive to receive vision information. The robot-side program needs to be modified.
Troubleshooting Approach:
Analyze the robot program or the triggering timing of the program based on the above two possible causes.